Remote Access - switel DCT427 Mode D'emploi

11.10 Remote access

You can call your answering machine to play any messages received and execute other func-
tions. A condition for this is to use a telephone which implements tone dialling.
11.10.1 Security code for remote access
To make use of the remote access feature, you must enter a security code. The default security
code set at the factory is 000".
Changing the security code
Using the TAM Settings menu on the handset:
+ or , Remote Code , 
+ or , 0 , ë
+ or , 0 , ë
+ or , 0 , ë

Playing back the security code
Using the base station:
–
11.10.2 Start remote access
ë
*, ë
If the security code is entered incorrectly twice, the line is automatically disconnected.
You can now initiate other functions. . Remote access key assignment table
11.10.3 Remote activation of the answering machine
ë
If you have forgotten to switch the answering machine on, your call is taken after 20
rings.
*, ë
If the security code is entered incorrectly twice, the line is automatically disconnected.
7
You can now initiate other functions. . Remote access key assignment table
− Telephone Answering Machine −
Select the function and confirm
Select the 1st digit and change it
Select the 2nd digit and change it
Select the 3rd digit and change it
Confirm the entries
Play back the security code currently set
Dial your own phone number
While the OGM is playing, press the Star button and enter
the security code
Dial your own phone number
While the OGM is playing, press the Star button and enter
the security code
Switch the answering machine on
113