Memory Capacity - switel DCT427 Mode D'emploi

11.8.2 Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 3 minutes long. The re-
spective, pre−recorded outgoing message is replaced by the one you record. The pre−recorded
outgoing messages can be restored simply by deleting your own outgoing messages (refer to
Chapter 11.8.4).
Using the base station:
2 sec @
Press and hold wor v
{ì}, ð
Release wor v
Using the handset in the TAM Settings menu:
+ or , Record OGM , 
+ or ,
e.g.: Ans & Rec , 
{ì}, ð
#
11.8.3 Playing back outgoing message
Using the base station:
@
Using the handset in the TAM Settings menu:
+ or , Play OGM
+ or ,
e.g.: Ans & Rec , 
11.8.4 Deleting your own outgoing message
After deleting your own outgoing message, the pre−recorded message is automatically reactiva-
ted.
Using the base station:
@
–
Using the TAM Settings menu on the handset:
+ or , Delete OGM
+ or ,
e.g.: Ans & Rec , 
11.9 Messages / Memos

11.9.1 Memory capacity

The answering machine can digitally save up to 59 incoming messages with a total length of 13
minutes. The maximum length for each incoming call is 3 minutes. If the caller's message is lon-
ger, the call is disconnected. If there is a pause in excess of 8 seconds during recording, the call
is automatically ended. When the answering machine memory is full, the answering mode wio-
thout recording" is activated automatically.
11.9.2 Memos
A memo is a message left on the answering machine for other answering machine users and is
treated in the same way as an incoming message. A memo cannot be longer than 2 minutes.
Using the TAM Settings menu on the handset:
+ or , Record Memo , 
{ì}, ð
#
− Telephone Answering Machine −
Activate Setting mode
Record for OGM 1 or 2
Speak your message after the acoustic signal
Stops recording of OGM 1 or 2
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Speak your message after the acoustic signal
End recording
Play outgoing message currently set
, 
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Play the outgoing message currently activated
Press the button during playback to delete the OGM
, 
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Select the function and confirm
Speak your message after the acoustic signal
End recording
111