Warranty; Ec Declaration Of Conformity - Storch HVLP SmartFinish 360 Mode D'emploi

Warranty

Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial
customers. If we have granted an extended warranty period, this period will be noted separately in the operating
manual for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our
logistics centre in Berka, postage paid, or send it to one of our authorised service centres. Please contact the chargea-
ble STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third party
components, improper handling and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.

EC Declaration of Conformity

Name / Address of issuer:
We herewith declare:
that the following machine complies with the fundamental health and safety requirements of the EC Directives in terms
of its design, construction and version we have brought into circulation.
This warranty loses its validity in case of unauthorised modification of the tool.
Designation of the machine:
Machine Type:
Item number:
Applied EC directives
Machinery Directive:
Low Voltage Directive:
EC- Electromagnetic Compatibility
Directive:
RoHS Directive:
Applied harmonised standards
Representative authorised to compile the technical documentation:
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6 - 8
42107 Wuppertal
Jörg Heinemann
- Managing Director -
Wuppertal, 03-2017
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6 - 8
D-42107 Wuppertal
HVLP SmartFinish 360 / HVLP SmartFinish 360 pistol
Low pressure spraying system
68 43 00 / 68 43 10
2006 / 42 / EC
2014 / 35 / EU
2014 / 30 / EU
2011 / 65 / EU
EN 60204-1, EN 60335-1, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, EN 50581
91 Original instruction