Skandika Fitness ELITE PRO Instructions De Montage Et Mode D'emploi page 24

ASSEMBLY INSTRUCTIONS
Step 5
Turn main frame so that the front support tube is facing the floor. Pull out the ball pin (35) from the main
frame and unfold the device. Insert the ball pin (35) back to its position for securing the main frame.
Attention: Before insertion of ball pin (35):
1. Slightly lift up main frame
2. Align drilling holes
3. Insert ball pin
Step 6
Insert two fixed brackets for handlebars (11L/R) into the holes on the front support tube of main frame
(1). Attach the left pedal (14L) to the left side of main frame (1), secure with two allen bolts (13). Repeat
this procedure for the right pedal (14R) on the right side of main frame (1).
24