Skandika Fitness ELITE PRO Instructions De Montage Et Mode D'emploi page 23

Step 4
Turn over the main frame, so that the rear support tube (54) is facing the floor. Take off four (pre-as-
sembled) self-tapping screws (10) from the front stabilizer tube (8L/R) and put the end caps onto the
front support tube (9). Use the self-tapping screws (10) for fixation. Attach the front support tube (9) to
main frame (1) and secure with four allen bolts (19).
ASSEMBLY INSTRUCTIONS
Step 3
Slide the seat (53) onto the slide rail (45). Insert two
cushion rubbers (36) to the slide rail (45), slightly fas-
ten with two allen bolts (34). Attach two foot mats (55)
to the rear support tube (54). Attach the rear support
tube (54) to the slide rail (45), fasten with one allen
bolt (19), three flat washers (43) and two allen bolts
(42). Put two end caps (40L/R) onto the ends of slide
rail (45).
23