Safety Instructions; Operator - AL-KO Robolinho 500 Mode D'emploi

Safety
ing switched off by a safety sen-
sor. The error message is shown
on the display and must be ac-
knowledged. The reason for the
triggering of the sensor must be
resolved.
Lifting sensor
If the appliance is raised by the
housing during operation, the
travel drive switches off and the
cutting blades are stopped.
Bump sensors for obstacle
detection
The appliance is equipped with
sensors that ensure it changes
its direction of travel if it encoun-
ters obstacles. When it encoun-
ters an obstacle, the top part of
the deck is shifted slightly and
the shock sensor triggered.
Tilt sensor in direction of
travel/sideways
If an upward or downward slope
or a laterally inclined angle of
24° (45 %) is reached in the di-
rection of travel, the appliance is
turned or the appliance changes
its direction of travel.
Rain sensor (Robolinho
700/1200/2000)
The appliance is equipped with a
rain sensor that (when activated)
interrupts the mowing procedure
in case of rain, and ensures that
442811_a
the appliance returns to the base
station.
NOTE The appliance can
be operated reliably in the imme-
diate vicinity of other automatic
lawn mowers. The signal used in
the boundary cable corresponds
to the standard defined by the
European Garden Machinery In-
dustry Federation (EGMF) with
regard to electromagnetic emis-
sions.

3.4 Safety instructions

3.4.1 Operator

■
Young people under 16 years
of age, persons with limited
physical, sensory or mental
abilities or with a lack of expe-
rience and knowledge and
persons who do not know the
operating instructions must
not use the device. Heed any
country-specific safety regula-
tions concerning the minimum
age of the user.
■
Do not operate the appliance
if you are under the influence
of alcohol, drugs or medica-
tion.
45