Base Station; Rechargeable Battery; Functional Description - AL-KO Robolinho 500 Mode D'emploi

GB
2.7

Base station

1 2 3
9
6
8 7
No. Component
1 Base plate
2 LEDs for status display
3 Charging contact
4
Home button (
5 Charging station
6 Cable shaft
7 Wheel recess
8 Hole for screw nails (9)
9 Screw nails
* Robolinho 700/1200/2000
2.8

Rechargeable battery

The rechargeable battery can be changed by the
user.
NOTE Fully charge the rechargeable bat-
tery before using it for the first time. The re-
chargeable battery can be charged in any charge
status. Interrupting charging does not damage
the rechargeable battery. The rechargeable bat-
tery can only be charged after the appliance has
been switched on.
■
The rechargeable battery is partially charged
on delivery. The rechargeable battery is regu-
larly recharged during normal operation. The
appliance returns to its base station for this.
■
The integrated electronic control unit with a
monitoring function terminates the charging
42
4 3 5
6
) *
procedure when a 100% charge status is
reached.
■
The charging process only functions with per-
fect contact of the charging contacts on the
base station with the contact surfaces of the
appliance.
■
The built-in protection circuit prevents the re-
chargeable battery from being charged at
temperatures above 45 °C. This prevents ir-
reparable damage to the rechargeable bat-
tery.
■
If the operating time of the battery is reduced
in spite of it being fully charged, have the bat-
tery replaced by a new genuine battery. This
task should be carried out by an AL-KO deal-
er, technician or service partner.
■
If the battery charge level has dropped below
the threshold set by the manufacturer as a
result of ageing or excessively long storage,
this means it can no longer be recharged.
Have the battery and the monitoring electron-
ic control unit checked by an AL-KO dealer,
technician or service partner, and replace
them if necessary.
■
The rechargeable battery status is shown on
the display. Check the rechargeable battery
status after about 3 months in storage. To do
so, switch on the appliance and read off the
rechargeable battery status. If the recharge-
able battery is now only charged to approx.
30 % or less, place the appliance in the base
station and switch it on so the rechargeable
battery is charged. If the charging station was
removed to store the base station (see chap-
ter 11.2 "Storing the charging pole",
page 56), first mount it again in reverse or-
der and connect the base station to the
mains supply again.
■
If electrolyte has escaped into the appliance:
Have the appliance repaired by an AL-KO
service centre.
■
If the rechargeable battery has been re-
moved from the appliance: If the eyes or
hands have come into contact with escaped
electrolyte, flush them immediately with wa-
ter. Immediately consult a doctor.
2.9

Functional description

Moving on the grass surface
The appliance moves freely in a mowing area de-
limited by a boundary cable. The appliance is ori-
ented by sensors that detect the magnetic field of
the boundary cable.
Product description
Robolinho