Possible Misuse; Safety And Protective Devices; Pin And Puk Input; Sensors - AL-KO Robolinho 500 Mode D'emploi

Masquer les pouces Voir aussi pour Robolinho 500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 91
GB
trary to the intended use and will
result in exclusion of the warran-
ty as well as loss of conformity
(CE mark); the manufacturer will
thus decline any responsibility
for damage and/or injury suf-
fered by the user or third parties.
The application limits of the ap-
pliance are:
Max. area:
Robolinho 500: 500 m
Robolinho 700: 700 m
Robolinho 1150: 1200 m
Robolinho 1200: 1200 m
Robolinho 2000: 2000 m
Max. upward/downward
slope: 45 % (24°)
Max. lateral inclined angle:
45 % (24°)
Temperature:
Charging: 0 – 45 °C
Mowing: 0 – 55 °C

3.2 Possible misuse

This machine is not suitable for
use in public gardens, parks,
sports stadiums, and in agricul-
ture and forestry.
44
3.3 Safety and protective
devices
WARNING! Risk of injury.
Defective and disabled safety
and protective devices can result
in serious injury.
Have any defective safety and
protective devices repaired.
Never disable safety and pro-
tective devices.
2

3.3.1 PIN and PUK input

2
The appliance can only be start-
2
ed by entering a PIN (Personal
2
Identification Number). This pre-
2
vents the appliance from being
switched on by unauthorised
persons. The factory setting of
the PIN is 0000. The PIN can
be changed, see chapter 5.2
"Making the basic settings",
page 50.
If the PIN is entered incorrectly 3
times, the PUK (Personal Un-
locking Key) must be entered. If
this is also entered incorrectly,
the user must wait 24 hours until
entering it again.
Keep the PIN and PUK so
that they are inaccessible to
unauthorised persons.

3.3.2 Sensors

The appliance is provided with
several safety sensors. It does
not restart automatically after be-
Safety
Robolinho

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Robolinho 700Robolinho 1150Robolinho 1200Robolinho 2000

Table des Matières