Jug Volume (Menu 3.3); Changing The Selection Buttons (Menu 3.4 Until 3.7) - Animo ComBi line CB 5 Mode D'emploi

12.4.4

Jug volume (Menu 3.3)

You can change the volume of the jug with this function.
The jug volume is set to 250 ml as standard
The settings scope is between 200 and 2500 ml (1 ml steps).
Set the required jug volume and confirm your changes with
the START button or go back without saving any changes
by pressing the STOP button
12.4.5 Changing the selection buttons
(menu 3.4 until 3.7)
You can set each selection button as required with this
function. The four selection buttons (fig. 25) are set in the
factory as shown in the overview below (Table 2).
With the help of Buttons 1 to 4 (menu 3.4 to 3.7), the choice
can be set within the scope with associated step size
indicated in the table below.
Factory
Model settings
CB 5 1-3-4-5 litre
CB 10 2,5-5-7,5-10
CB 20 5-10-15-20
Table 2. Selection buttons unit litres
Set the required amount for button 1 and confirm your
changes with the START button
any changes by pressing the STOP button
buttons 2 to 4.
Have you changed the unit of Litres to Cup or Jug?
The litre setting is automatically calculated by the relevant litre
setting divided by the cup or jug volume. The four selection
buttons then automatically have the settings as shown in the
following overview (Table 3 + 4) Each selection button within
the settings scope and associated step size can be set with
the help of the menu buttons 3.4 to 3.7.
Factory
Model settings
CB 5 8-24-32-40
CB 10 20-40-60-80
CB 20 40-80-120-160
Table 3. Selection buttons unit cups
ComBi line
.
Settings
scope Step
1- 5 litre 0,5 l
2- 10 litre 0,5 l
4- 20 litre 1 l
or go back without saving
. Repeat this for
Settings scope
cup = 125 ml Step
8- 40 cups 1 cup
16-80 cups 1 cup
32-160 cups 5 cup
Change cup volume
1
3
Changing the Selection
74
2
4
Button 1, 2, 3 and 4
Fig. 24
Fig. 25
Fig. 26
03/04