General; A Quick Look At The Appliance; Most Important Parts (Fig. 1) - Animo ComBi line CB 5 Mode D'emploi

1.

GENERAL

The ComBi-line 5 - 20 is a professional coffee maker, equipped with a continuous flow heater. The appliance
comes with a separate hot water system with a no-drip tap through which it is possible to draw off hot water
during the coffee brewing process. This hot water system can be used for the making of tea, hot chocolate,
instant soup etc. It is very easy to use. The user can choose from a number of fixed set amounts via a control
panel with a graphic display which also offers information about the current process of the appliance.
Specific requirements and wishes concerning brewing quantity, hot water temperature, etc. can be accessed
and programmed by the operator via a PIN. The operator also has the possibility of reading counters and
activating a descaling program.
1.1

A quick look at the appliance

The most important parts of the appliance are shown in the fold-out sheet in this manual.
Keep the fold-out sheet open when reading the instructions.
1.1.1

Most important parts (fig. 1)

1. Socket L/R for container heating
2. ON/OFF switch coffee brewing system
3. Wall bracket
4. Control panel
4.1 STOP button / Back button (without changing)
4.2 Illuminated display
4.3 Selection button brew volume 1
4.4 Selection button brew volume 2
4.5 Selection button brew volume 3
4.6 Selection button brew volume 4
4.7 START button / Accept button (save)
4.8 Timer button
4.9 On/Off button container heating L/R
5. Dry-boil protection coffee brewing system
6. Swivel arm
7. Descale filling opening coffee brewing system
8. Drain hose coffee brewing system
ComBi line
46 03/04