Connections Using Hdmi Cables - Yamaha HTY-7030 Mode D'emploi

Connections using HDMI cables

This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI
jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 22 to
25. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack
on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit.
Notes
• Even if you connect your TV and this unit via the HDMI jack, you need to connect the video input jack on your TV to the VIDEO
OUT jack on this unit in order to display the OSD of this unit.
• When HDMI CONTROL is set to OFF (see page 82) and this unit is in the standby mode, the signals input at the HDMI IN jacks are
not output at the HDMI OUT jack.
y
We recommend that you secure the HDMI cable(s) with adhesive tape, etc. once you have connected the HDMI cable(s) to the HDMI
jack(s) of this unit.
Rear panel of this unit
OUT DIGITAL INPUT
VIDEO AUX 2
SUBWOOFER AUX 1
Video
input
Audio/Video
A
HDMI cable
DVD
COAXIAL
OPTICAL
TV/STB
A
Optical
HDMI
digital
input
input
TV
AUX 1
DVD
IN
*
OUT
HDMI
A
HDMI
output
DVD player/recorder
OSD video pin cable
Optical cable
Connections
This connection (except for a game
console) is not necessary if your
TV has a built-in digital satellite
tuner, cable TV tuner, or digital
airwave tuner.
A
HDMI
output
Digital satellite tuner,
cable TV tuner,
digital airwave tuner,
or game console
Video
Audio
21
En