The Flow Chart Of Set Menu - Yamaha HTY-7030 Mode D'emploi

The flow chart of SET MENU

The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See "Changing OSD language" on page 34.
Run AUTO SETUP (IntelliBeam).
See "AUTO SETUP (IntelliBeam)" on page 35.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See "Playback" on page 45, "Enjoying surround sound" on page 54, and "Using sound field programs" on
page 63.
Run MANUAL SETUP.
See "MANUAL SETUP" on page 72.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 74) or for BEAM ADJUSTMENT (see page 75) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 77).
Look for a remedy.
See "Error messages for AUTO SETUP" on page 41 for a complete list of error
messages and possible remedies.
If you want to make additional settings
and adjustments
Using SET MENU
If an error occurs
33
En