Enjoying Stereo Sound; 2-Channel Stereo Playback - Yamaha HTY-7030 Mode D'emploi

ENJOYING STEREO SOUND

You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control.
Notes
• When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes
compressed. If the volume level decreases to the extreme, use other beam modes except My Beam.
• When the 2-channel or 5-channel stereo playback is selected as the beam mode, the surround modes (see page 56) and the CINEMA
DSP programs (see page 63) become ineffective.
1
STEREO
4
MUSIC
7
OFF
0
ENHANCER
CAT/
A-E
DISPLAY
(U.S.A. and Canada models)

2-channel stereo playback

Sounds are output from the front right and left channels.
This is ideal for playing back hi-fi sources, such as CDs,
and can be used to replace your TV speakers.
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press STEREO to select the 2-channel stereo
playback as the beam mode.
"STEREO" appears in the front panel display.
STEREO
60
En
Enjoying stereo sound
2 3
MY BEAM MY SUR.
5 6
MOVIE SPORTS
8 9
SUR. DECODE
+10
ENTRY MENU
TV/AV
ENTER
YSP
RETURN
4
Note
When you play back multi-channel sources, all signals except
those from the front left and right channels are mixed down and
output from the front left and right channels. No audio is output
from the center and surround channels.
5-channel stereo playback
Sounds are output from front left and right, center, and
surround left and right. This is ideal for playback in a large
listening area or at a party.
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press STEREO twice to select the 5-channel
stereo playback as the beam mode.
"5CH STEREO" appears in the front panel display.
STEREO
4