Connections - Yamaha YSP-1400 Mode D'emploi

Connections

Connect to a TV (or other peripheral device).
CAUTIONS
• Do not connect the power cable of the unit to the AC wall outlet before making
connections.
• Do not use excessive force when inserting the cable plug. Doing so may damage the
cable plug or AC wall outlet.
1
Connect the TV and unit with the optical cable
(supplied).
Remove the cap of the optical cable and check the
direction of the plug.
2
Connect the power cable of the unit to an AC
wall outlet.
3
Set the TV as follows.
• Set the TV volume to minimum.
• Disable the TV built-in speaker output (if available).
HINT
• If a setting to disable the speaker output is not available on your TV, you may disable it
by connecting headphones to the headphone jack on the TV. For details, refer to the
manuals of the TV.
• The TV and BD/DVD input jacks support the following audio signals.
− PCM (2ch)
− Dolby Digital (up to 5.1 channels)
− DTS Digital Surround (up to 5.1 channels)
6
Unit (rear)
Optical cable
Coaxial digital cable
OPTICAL OUTPUT
TV
Playback device (such as a BD player)
Set top box
Power cable
To AC wall outlet
HINT
• The unit plays the audio output
from your TV. If the sound output
from a playback device (such as a
BD player) or a set top box cannot
be output from your TV or if your
TV does not have any audio input
jacks to connect a playback
device, connect the playback
device and unit directly with a
commercially available digital
coaxial cable.
DIGITAL OUTPUT