Eu Declaration Of Conformity - Güde 95148 Traduction Du Mode D'emploi D'origine

String Trimmer
Appliance description
Pic. 1:
1. Switching handle
2. ON/OFF
3. Additional handle
4. Protection cover
5. Angle setting button
6. Accumulator
7. Blade
Technical specifications
String trimmer
Cutting width:
Telescopic rod:
Idle speed:
Noise:
Weight:
Use as designated
The appliance must not be used for grinding
composting material as persons and items could get
damaged.
Any other use is considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damages. Please be sure to know that our
appliances have not been designed for industrial purposes.
Assembly
• Install the trimmer head as shown in pictures 1A-1C.
• Fit the protection cover on the appliance head until it
snaps in audibly (pic. 1D). Screw the cover using a
bolt included in the supply.
• Insert the appliance head and guide rod into each
other and tighten the cap nut in the closed lock
direction (pic. 1F).
• The angle of inclination can be set by pressing the
adjusting knob (pic. 1/5).
First starting up
Make sure the blade cover is in place to prevent
cutting injuries! The accumulator must be charged to
the full extent!
• Insert the blades until they snap in audibly (pic. 1E).
•
Insert the accumulator in the holder until it snaps in.
To release it, the lock button on the accumulator must
be pressed.
•
The appliance is now ready to be operated.
•
To control the appliance, the switching handle (pic.
1/1) must be pressed first and then the switch button
(pic. 1/2).
Appliance-specific safety instructions
Switch the appliance off before working.
Make sure bystanders are not hit or injured by thrown-
away items.
Wait until all appliance parts stop before touching them.
Never expose the appliance to rain or moisture. Keep the
appliance in a dry place.
Children and persons not familiarised with the appliance
and persons with limited physical, sensory and mental
skills must not use the appliance.
Original accessory equipment to be used only.
#95148
230 mm
950 – 1,200 mm
-1
8,000 per min
LWA 94 dB
1.52 kg
LI-ION 18 V Garden Tools Kit 2 in 1
Check the appliance every time it is to be used. The
appliance must not be used if safety equipment and/or
blades are damaged or worn.
Check the area you want to trim before working with the
appliance. Remove any undesirable items that you find.
Watch out for undesirable items even when working. If an
obstacle is encountered when trimming, switch the
appliance off (release the switch) and remove the obstacle.
If blades are blocked, switch the appliance off and remove
the blocking (big branch, undesirable item) using a blunt
tool. Never use your fingers – blades under voltage may
cause serious injuries. The accumulator should preferably
be removed before removing the blocking. Blades keep
running for a while after the appliance is switched off!
Provide a safe posture every time you work. Be careful
when reversing – risk of tripping!
If work is interrupted and you wish to resume working at
any other place, the appliance must be switched off until
you are at that place.
The appliance needs to be checked and treated at regular
intervals. Damaged blades must always be replaced in
pairs. If the appliance is damaged by impact (after hitting a
hard surface, etc.), it must be retested by a professional.

EU DECLARATION OF CONFORMITY

We,
Güde GmbH & Co. KG
Birkichstrasse 6
D74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with
the appropriate basic safety and health requirements of the
EU Directives based on its design and type, as brought
into circulation by us.
In case of alternation of the machine, not agreed
upon by us, this declaration will lose its validity.
Machine description:
String trimmer (LI-ION 18V Garden Tools Kit 2 in 1)
Art. No.
#95148
Applicable EU Directives:
2004/108 EG
2006/42 EG
Applicable harmonised standards:
EN 55014-1/A3:2006
EN 60745-1/A3:2009
EN 55014-2/A3:2001
EN 1000-3-6/A3:2007
EN 10517/A3:2009
EN 786/A3:2009
Place of certification:
Intertek Deutschland GmbH
Max-Eyth-Str.14
D-70771 Leinfelden-Echterdingen
Date/authorised signature:
Title of signatory:
Technical documentation:
Accessory equipment may be received as option
18 V/1.3 Ah spare accumulator
Art. No. 95149
Spare string trimmer blades
Art. No. 95521
17
23 Feb, 2011
Managing Director
Mr Arnold
J. Bürkle FBL; QS