Specified Conditions Of Use; Residual Risks; Emergency Procedure; Mains Connection - Güde GFLS 1600 3 IN 1 Traduction Du Mode D'emploi D'origine

Children shall not play with the
appliance.
Cleaning and user maintenance
shall not be made by children wit-
hout supervision.

Specified Conditions Of Use

The leaf vacuum is suitable for collecting dry leaves
and light garden waste such as dry grass, small twigs,
and dry spruce and pine needles.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Operate the leaf vacuum using only the nozzle
and the connected collection bag.

Residual risks

Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage. Wear ear
protectors!
Despite the observance of the operating instructions
there still may be some hidden residual risks.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/Caution!
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Risk of injury by thrown-off items!
Keep bystanders out the dangerous area
(5 m).
Risk of injury by rotating impeller.
Keep your hands in safe distance.
Unplug the machine before any work
on it.
Unplug the mains plug if the cable beco-
mes damaged or tangled.
Keep dry at all times. Never expose tool
to rain.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Class II tool.

Mains Connection

Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to
connect to sockets without an earthing contact as
the design conforms to safety class II.
Only plug-in when machine is switched off.
ENGLISH
15