Güde 95148 Traduction Du Mode D'emploi D'origine page 76

Hedge Trimmer
Appliance description
Pic. 2:
1. Bar
2. Hand protection
3. Guide handle including up/down switch
4. Handle
5. Accumulator
6. Bar cover
7. Hand throttle
Technical specifications
Hedge trimmer
Bar length:
Cutting length:
Blade gap:
Cutting width:
Idle speed:
Noise:
Weight:
Use as designated
The appliance has been designed for trimming bushes and
hedges for DIY and gardeners.
The appliance must not be used for grinding
composting material as persons and items could get
damaged.
Any other use is considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damages. Please be sure to know that our
appliances have not been designed for industrial purposes.
First starting up
Make sure the blade cover is in place to prevent
cutting injuries! The accumulator must be charged to
the full extent!
•
Insert the accumulator in the holder to snap in (pic.
2A). To release it, the lock button on the accumulator
must be pressed.
•
The appliance is now ready to be operated.
•
To control the hedge trimmer, the switch on the guide
handle and hand throttle (pic. 2B) must be switched
at the same time (pic. 2B). The hedge trimmer will
stop after the switch is released.
Appliance-specific safety instructions
Switch the appliance off before working.
Make sure bystanders are not hit or injured by thrown-
away items.
Wait until all appliance parts stop before touching them.
Never expose the appliance to rain or moisture. Keep the
appliance in a dry place.
Children and persons not familiarised with the appliance
and persons with limited physical, sensory and mental
skills must not use the appliance.
Original accessory equipment to be used only.
Check the appliance every time it is to be used. The
appliance must not be used if safety equipment and/or
blades are damaged or worn.
Check the hedges you want to trim before working with the
appliance. Remove any undesirable items that you find.
Watch out for undesirable items even when working. If an
obstacle is encountered when trimming, switch the
appliance off (release the switch) and remove the obstacle.
#95148
675 mm
app. 510 mm
15 mm
app. 14 mm
-1
1,250 per min
LWA 94 dB
2.2 kg
LI-ION 18 V Garden Tools Kit 2 in 1
If blades are blocked, switch the appliance off and remove
the blocking (big branch, undesirable item) using a blunt
tool. Never use your fingers – blades under voltage may
cause serious injuries. The accumulator should preferably
be removed before removing the blocking. Blades keep
running for a while after the appliance is switched off!
Provide a safe posture every time you work. Be careful
when reversing – risk of tripping!
If work is interrupted and you wish to resume working at
any other place, the appliance must be switched off until
you are at that place.
The appliance needs to be checked and treated at regular
intervals. Damaged blades must always be replaced in
pairs. If the appliance is damaged by impact (after hitting a
hard surface, etc.), it must be retested by a professional.
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6
D74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with
the appropriate basic safety and health requirements of the
EU Directives based on its design and type, as brought
into circulation by us.
In case of alternation of the machine, not agreed
upon by us, this declaration will lose its validity.
Machine description:
Hedge trimmer (LI-ION 18V Garden Tools Kit 2 in 1)
Art. No.
#95148
Applicable EU Directives:
2004/108 EG
2006/42 EG
Applicable harmonised standards:
EN 55014-1/A3:2006
EN 60745-1/A3:2009
EN 55014-2/A3:2001
EN 60745-15-2/A3:2009
EN 61000-3-6/A3:2007
Place of certification:
Intertek Deutschland GmbH
Max-Eyth-Str.14
D-70771 Leinfelden-Echterdingen
Date/authorised signature: 23 Feb, 2011
Title of signatory:
Technical documentation:
Accessory equipment may be received as option
18 V/1.3 Ah spare accumulator
Art. No. 95149
76
Managing Director
Mr Arnold
J. Bürkle FBL; QS