Cordless Screwdriver - Güde 95148 Traduction Du Mode D'emploi D'origine

Cordless Screwdriver

Appliance description
Pic. 1:
1. Torque adjustment
2. Quick chuck
3. Rotation direction switch
4. ON/OFF
5. Accumulator
6. LED
Technical specifications
Cordless screwdriver
Idle speed:
Torque levels:
Max. torque:
Chuck fastening extent:
Weight:
Use as designated
Suitable for bolt screwing and unscrewing and drilling in
wood, metal and plastic material.
Any other use is considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damages. Please be sure to know that our
appliances have not been designed for industrial purposes.
Before putting the appliance into operation
The accumulator is supplied charged to some extent. The
accumulator must necessarily be charged before putting
the appliance into operation for the first time.
CAUTION:
•
Sharp drills and perfect and appropriate screw edges
to be used only.
•
When drilling and screwing to walls you should check
whether there are no hidden electric cables and gas
and water pipes.
Operation
Torque adjustment:
Torque for a certain size of bolts will adjust to the torque
adjustment (pic. 3/1).
This depends on several factors:
• Type and hardness of the processed material.
• Type and length of the used bolts.
• Requirements imposed on the bolt connection.
Torque to be adjusted only in idle state of the
cordless screwdriver only.
Drilling:
For drilling, adjust the torque (pic. 3/1) to the last level -
"drill".
Rotation direction switch:
Use the slide switch (pic. 3/3) to set the rotation direction.
You can choose between right and left rotation. To prevent
transmission damage, the rotation direction may only be
changed when the appliance is idle. If the switch is in the
central position, ON/OFF is blocked.
ON/OFF:
The more you press the switch (pic. 3/4), the higher the
revolutions of the cordless screwdriver.
#95148
0 -550 per min-1
2 + 1 3
15 Nm
0.8-10 mm
1,2 kg
LI-ION 18 V Garden Tools Kit 2 in 1
Tool exchange:
Put the rotation direction switch (pic. 3/3) to the
central position whenever working with the cordless
screwdriver.
1. Unscrew the chuck (pic. 3/2) so that a tool may be
inserted.
2. Now choose the appropriate tool and insert it as deep
in the opening as possible.
3. Tighten the chuck again and check the tool fitting.
LED:
LED (pic. 3/6) enables additional lighting of the place of
screwing or drilling. LED switches on automatically after
pressing ON/OFF.
Appliance-specific safety instructions
Switch the appliance off before working.
Risk posed by the rotating drill.
Make sure bystanders are not hit or injured by thrown-
away items.
Wait until all appliance parts stop before touching them.
Never expose the appliance to rain or moisture. Keep the
appliance in a dry place.
Children and persons not familiarised with the appliance
and persons with limited physical, sensory and mental
skills must not use the appliance.
Original accessory equipment to be used only.
Check the screw edge fitting before putting the appliance
into operation.
Do not try to change the engine speed. Contact a
professional if facing a problem.
Before drilling holes in wall, use the cable/pipe locator to
check whether there are no electric cables and gas and
water pipes hidden in the wall.
19