Güde 95148 Traduction Du Mode D'emploi D'origine page 16

Cleaning
Keep the ventilation slots and body with no dust and dirt.
To clean the appliance, use a soft cloth and fine soap
water solution. Avoid direct contact of aggressive cleaning
agents with the appliance. No aggressive, volatile or
caustic cleaning agents may be used.
Appliances must be protected against moisture and dust.
If the appliance has not been used for a long time, keep it
covered in a dry and safe place inapproachable to
children.
If the accumulator can no longer be operated, please
contact our customer service centre.
Accumulator
Notice: The accumulator is supplied charged to some
extent.
To provide full accumulator performance, it should be
charged to the full extent before used for the first time.
The Li-Ion accumulator may be charged at any time
without its service life being reduced. Charging interruption
does not damage the accumulator.
The Li-Ion accumulator has electronic protection against
deep discharge.
When the accumulator is discharged, the electric tool
switches off due to the safety switch:
the inserted tool is not moving any longer.
After the electric tool is switched off automatically, do not
press the ON/OFF button.
If the accumulator is no longer used, we recommend
charging it to the full extent at least once in 6 months.
The appliance must not be stored or used at temperature
exceeding 40 °C as this reduces the service life of the
accumulator.
Accumulator charging:
1. To release the accumulator out of the appliance,
press the lock button and remove the accumulator.
2. Now check whether the system voltage specified on
the charger type label corresponds to the existing
system voltage.
3. Plug the charger and connect the feeder cable with
the power connection.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
16