Eu Declaration Of Conformity; Uk Declaration Of Conformity; Description - SKF 728619 E Mode D'emploi

EU Declaration of Conformity

728619 E
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
MACHINERY DIRECTIVE 2006/42/EC
and are in conformity with the following standards:
EN-ISO 12100:2010, EN-ISO 4413
Houten, The Netherlands, September 2021
Mrs. Andrea Gondová
Manager Quality and Compliance

UK Declaration of Conformity

728619 E
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
Supply of Machinery (Safety) Regulations 2008
(2008 No. 1597) and are in conformity with the
following standards:
EN-ISO 12100:2010, EN-ISO 4413
The person authorised to compile the technical
documentation on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury,
Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, September 2021
Mrs. Andrea Gondová
Manager Quality and Compliance
4 EN
EN

1. Description

The 728619 E is a two stage pump. The pump
supplies a high rate of flow (20 cm
below the switching pressure. Above the switching
pressure the flow is automatically decreased to
1 cm 3 per stroke.
A 3 metre long high-pressure hose is supplied
to connect the pump to the workpiece. One end
of the hose has a quick-connection coupling for
the connection to the pump. The other end of the
hose has a G 1 / " quickconnection nipple for the
4
connection to the workpiece.
The pump comes prefilled with SKF mounting fluid
(LHMF 300).
A 1 litre can of mounting fluid is also included.
These items are stored in a sturdy metal box.
The pump has an oil outlet connection (P).
The pump also has a return connection (R), to
return oil to the oil container.
The return connection can be connected to an
external oil reservoir when the oil container capacity
is not sufficient.
The release valve is in the pump head. The pump
includes a safety valve to prevent high pressure that
can cause damage to the pump.
3 per stroke)
P
P
R
R