Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
i)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
j)
Keep packaging elements and small assembly parts
in a place not available to children.
k)
Keep the device away from children and animals.
REMEMBER! When using the device, protect children
and other bystanders.
2.3. Personal safety
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety or
they have received instruction on how to operate the
machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
i)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
10
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
j)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
k)
Do not move, adjust or rotate the device in the
course of work.
l)
Clean the device regularly to prevent stubborn grime
from accumulating.
m)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
n)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
o)
Keep the device away from sources of fire and heat.
p)
In order to prevent injuries, always pay due care
when carrying out maintenance on the device, and
in particular when handling the cutting disks.
q)
Never press comestible products to the blade with
a hand or other body part, use a pusher.
r)
Do not operate the device without the pusher when
a small piece of meat remains to be sliced.
s)
Do not take dangerous positions, the blade may
cause injury.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
Rev. 09.09.2019
3. USE GUIDELINES
The device is intended to slice cured meats and meat.
Do not use the device to slice:
•
frozen products,
•
meat with bones,
•
fish and bones,
•
vegetables,
•
non-food products.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
Fig. 1.
21
1
2
9
3
10
4
8
7
6
5
20
11
12
18
19
13
17
14
15
16
1.
Blade cover
2.
Hand cover
3.
Regulation plate
4.
ON / OFF (I/0) switch
5.
Thickness regulation knob
6.
Foot
7.
Troley lock knob (tray + bracket + pusher)
8.
Bracket
9.
Pusher
10.
Food tray
11.
Sharpener
12.
Sharpener lock knob
13.
Rod fixing the blade cover
14.
Power cord
15.
Base
16.
Data plate
17.
Thickness support bracket
18.
Blade/knife
19.
Deflector
20.
Pusher handle
21.
Blade annular cover
Rev. 09.09.2019
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
The ambient temperature should fluctuate between 5 and
40 ° C and the relative humidity should not exceed 75%.
The surface on which the device will be placed should
at least fit the dimensions of the device and be located
about 80 cm from the floor. The device should always be
used when positioned on an even, stable, clean, fireproof
and dry surface, and be out of the reach of children and
persons with limited mental and sensory functions. Position
the device such that you always have access to the power
plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details on the product label. The electrical socket, which
the device will be connected to, must be grounded and
fully functional.
Disassemble the device and all its components and clean
them before the first use.
Electrical schema
8
Fig. 2.
4
10
Motor
9 9
5
1
6
PCB
3
N
7
L
2
7
11
1
„I" switch-on
2
„O" switch-off
3
light
4
230V AC power supply
5
black
6
red
7
white
8
capacitor
9
blue
10
motor
11
micro-switch
If the blade rotation direction is not correct, reverse two
of the three power cords in the plug or socket. The correct
direction of rotation is shown in the illustration (Fig. 3):
Fig. 3.
11
Publicité
Table des Matières
