Lubrication And Routine Maintenance - Promac 930VLB Instructions De Fonctionnement

9.2. Lubrication and Routine
Maintenance
Apply oils to the driving parts of the machine prior
to operation and supply coolant during operation
to ensure stability of cutters and the object being
processed. Please refer to the lubrication as below
for more details about use oil. To extend your
machine life, please make a maintenance schedule
daily, weekly, monthly or semi-annual and annual.
Neglecting the machine maintenance will result in
premature wear and poor performance.
9.2.1. Lubrication
1. Lubricate - Column, Quill. Use
machine tool oil with light film of oil.
2. Grease - Rack on the column so
that the worktable can move up/down
smoothly. Use SAE 20 oil. To clean rack
with kerosene before applying oil.
9.2.2. Daily Maintenance
Make a general cleaning by removing
dust and shavings from the machine.
Check that the shields and emergency
stops are in good working order.
After daily use, disconnect machine
from power source or press
emergency stop switch to shut off the
power completely. Do not keep the
machine connected over 24 hours, it
may cause damage to the machine.
9.2.3. Weekly Maintenance
Clean the machine including the
coolant tank. Change the coolant
water once a week.
9.2.4. Monthly Maintenance
Lubricate machine column, spindle
and rack devices.
Check that all screws on the motor,
the pump and the guard are tight and
secure on the right position.
9.2.5. Annual Maintenance
Change the driving belt using type
OPTI-belt 656x8M.
9.2.6. Oils for Lubricating Coolant
Considering the vast range of products
in the market, the user can choose the
one most suited to their own
requirements, using as reference the
type SHELL LUTEM OIL ECO.
THE MINIMUM PERCENTAGE OF OIL
DILUTED IN WATER IS 8~10%.
9.2.7. Oil Disposal
Oil products must be disposed in a
proper manner following local
regulations.
9.2.8. Special Maintenance
Special maintenance operations must
be carried out by skilled personnel.
However, we advise contacting dealer
and/or importer the term special
maintenance also covers the resetting
of protection and safety equipment
and devices.
14