Safety Warnings - Festool PLANEX LHS 2 225 EQI Notice D'utilisation

Contents
1 Symbols..................................................... 19

2 Safety warnings.........................................19

3 Intended use..............................................21
4 Technical data........................................... 21
5 Parts of the device.....................................21
6 Commissioning..........................................22
7 Settings......................................................22
8 Working with the electric power tool........25
9 Service and maintenance..........................25
10 Accessories............................................... 26
11 Environment.............................................. 26
12 General information.................................. 26
13 Troubleshooting........................................ 27
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Connecting the mains power cable
Disconnecting the mains power cable
CAUTION! Do not look directly into the
light beam!
Do not dispose of it with domestic
waste.
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tool contains a chip which stores data.
See section 12.1
Tip or advice
Handling instruction
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Machine-specific safety notices
- This power tool is intended to function as a
sander with abrasive. Read all safety
warnings, instructions, illustrations and
specifications provided with this power
tool. Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious injury.
Do not use accessories which are not spe­
-
cifically designed and specified by the tool
manufacturer. Just because the accessory
can be attached to your power tool, it does
not assure safe operation.
- The outside diameter and the thickness of
your accessory must be within the capaci­
ty rating of your power tool. Incorrectly
sized accessories cannot be adequately
guarded or controlled.
Do not use a damaged accessory. Before
-
each use inspect the accessory such as
abrasives for chips and cracks, backing
pad for cracks, tear or excess wear. If
power tool or accessory is dropped, in­
spect for damage or install an undamaged
accessory.
- Wear personal protective equipment. De­
pending on application, use face shield,
safety goggles or safety glasses. As ap­
propriate, wear dust mask, hearing pro­
tectors, gloves and workshop apron capa­
ble of stopping small abrasive or work­
piece fragments. The eye protection must
be capable of stopping flying debris gener­
ated by various operations. The dust mask
or respirator must be capable of filtrating
particles generated by your operation. Pro­
longed exposure to high intensity noise may
cause hearing loss.
English
19