Intended Use; Technical Data; Parts Of The Device - Festool PLANEX LHS 2 225 EQI Notice D'utilisation

CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
LHS 2 225 EQI/LHS 2 225 EQ
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

The long-reach sander is designed for sanding
primed drywall constructions, ceilings and
walls indoors as well as for removing carpet
residue and coats of paint indoors.
A maximum of two extension tubes can be
used.
The long-reach sander is not suitable for wet
sanding and for working with oil and polishing
agents.
Not suitable for continuous industrial opera­
tion.
The user is liable for improper or non-in­
tended use.
4

Technical data

Long-reach sander
Power
Speed (no-load)
(vector sum for
h
a < 2.5 m/s 2
h
K = 1.5 m/s 2
LHS 2 225 EQI/
LHS 2 225 EQ
400 W
5000–8500 rpm
Long-reach sander
Sanding stroke
Backing pad diameter
Abrasive diameter
Dust extraction connec­
tion
Frequency
Equivalent Isotropically
Radiated Power (EIRP)
Short version length
(without extension tube)
Long version length
(one extension tube)
Weight as per EPTA-Procedure 01:2014
Long version (one ex­
tension tube)
Short version (without
extension tube)
5

Parts of the device

[1-1] Handle
[1-2]
Bluetooth ®
LHS 2 225 EQI)
[1-3] LED indicator (only LHS 2 225 EQI)
[1-4] Surface control light button
[1-5] On/off switch
[1-6] T-handle
[1-7]
Hose clip
[1-8] Handle
[1-9]
Speed control
[1-10] Plug-it connection
[1-11] Extractor connector
[1-12] Suction sleeve stop
[1-13] Locking lever
[1-14] Extension tube
[1-15] Suction regulator
[1-16] Sanding head
[1-17] Surface control light
[1-18] Backing pad
LHS 2 225 EQI/
LHS 2 225 EQ
4 mm
220 mm
225 mm
36 mm (27 mm)
2402 Mhz –
2480 Mhz
<10 dBm
1.65 m
4.7 kg
button (only
English
1.2 m
4 kg
21