Dimensional Drawings; Ec Declaration Of Conformity - SICK RE300 Notice D'instructions

6 General system data
6.1 Technical specifications
Housing material Moulded ABS
Regulations EN 60 947I5I3
Enclosure rating in compliance IP 67
with IEC 60 529
Function Magnetically
Category/Performance Level Up to Cat. 4/PL e, as per EN ISO 13489-1 in connection with a
suitable safety module
Safety integrity level Up to SILCL 3, as per EN 62061 in connection with a suitable
safety module
6
B10 20 x 10 with low load to EN ISO 13849-1
d
1) –8
PFHd 2.5 x 10
TM (mission time) 20 years (EN ISO 13849)
Classification Up to PDF-M as per EN 60 947I5I3 in conjunction with a suitable
safety module
Ambient temperature Operation
–10 °C ... +55 °C
Storage
–25 °C ... +70 °C
Max. switching voltage < 30 V
Max. switching current 30 mA
Shock resistance 30 g/11 ms
Vibration resistance 10 ... 55 Hz, Ampl. 0.35 mm ±15%
Switching distances See table (Tab 2 "Response range")
Max. cable length Overall resistance <75
Type of connection RE300-DA.. Encapsulated cable with ferrules
Tab 1: Technical specifications
1) At low load with a switching frequency of 1 operation/min., 24 hrs/day, 365 days/year,
there are 525600 switching operations per year.
Read head Internal Safe switch Safe switch
circuitry on distance off
1)
S [mm]
not distance
ao
actuated S [mm]
ar
blu
red
RE300 5 15
yel
grn
Tab 2: Response Range
1) There must not be any ferro-magnetic material near the read head or actuator.
All data apply for approach from the front and alignment offset m = 0.
6.2

Dimensional drawings

4.2
4.2
5
4.5 5
19
Fig. 7: Dimensional drawing RE300-DA.. magnetic safety switch
9
7
19
Fig. 8: Dimensional drawing actuator RE300-KA
7 EC declaration of
conformity
The RE300 safety switch was manufactured in
conformity with the following directives and
4.5
standards:
the Machinery Directive 2006/42/EC,
EMC directive 2004/108/EC.
Note
You can obtain the EC declaration of conformity
with the standards used at: www.sick.com
19
7
19