Cleaning And Care - Steba DF 200 Mode D'emploi

∙ Keep the power supply cord away from hot parts.
∙ Never leave the appliance unattended when operating.
∙ Do not put anything on the appliance.
∙ Do not leave the appliance outdoors or in a damp area.
∙ Never immerse the appliance in water.
∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
Attention! Housing and glass get hot. Danger of
∙
burns! The appliance becomes very hot. Do not move
the appliance until it has cooled down! The sides of the
appliance become hot. Do not touch during the usage.
∙ Watch out for steam during cooking and when you open the
lid.
∙ In order to avoid a hazard due to inadvertent resetting of the
thermal cutout,this appliance must not be supplied through an
external switching device,such as a timer,or connected to a cir-
cuit that is regularly switched on and off by the utility.
∙ Working area - Important: Never place the appliance on or
next to a hot surface (e.g. stove). Always use it on a stable, flat
and temperature resisting surface. Please ensure that there are
no flammable objects in the vicinity of the deep fat fryer. Do
not place directly under a kitchen hood.

Cleaning and care

∙ Each time you change the frying fat, the appliance should be
cleaned thoroughly.
∙ Before cleaning always pull the power plug.
∙ Make the appliance cool down to room temperature.
∙ Do not plunge the electrical part into water.
∙ Remove the fryer basket.
13