Filling With Petrol; Operation; Starting And Stopping The Engine - Grizzly BRM 46-160 H Traduction De La Notice D'utilisation Originale

GB

Filling with Petrol

Warning! Petrol is flammable and haz-
ardous to health:
- Keep petrol in containers intended for
this purpose;
- Only refuel outdoors and never with
the engine running or when the ma-
chine is hot;
- Open the filler cap carefully to allow
excess pressure to escape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhalation of
the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks, open
flames and other ignition sources;
- Dispose of leftover petrol in an envi-
ronmentally friendly way (see "Dis-
posal / Environmental Protection").
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (8) and
pour in the petrol to the filler
plugs (31). Do not fill the tank
entirely, to allow the petrol room
to expand.
2. Wipe away petrol residues
around the filler cap and close
the filler cap.
88

Operation

A certain level of noise exposure
caused by this device is unavoid-
able. Rearrange noise-intensive
works to times approved and speci-
fied for this purpose. Comply with
the rest periods and reduce the
work period down to the minimum.
For your personal protection and
the protection of people near by,
suitable hearing protection must be
worn.
Starting and Stopping the En-
gine
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
There is a risk of fire.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
is touching neither objects nor the
ground.
For your safety: Stand behind the
device when starting it.
Check the petrol and oil levels reg-
ularly (see "initial operation") and
refill in time.
1. Open the petrol tap (32) by turn-
ing the controller to the left.
2. Pull the safety loop (2) towards
the grip handle (1) and hold it.
3. Pull the starter handle (25).
4. If the motor starts slowly, release
the starter handle into the starter
rope-guide (3).