Component Specifications; Srl-Le Specifications - 3M DBI-SALA Manual D'instructions

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
drum wound Cable or Rope Lifelines (A) that retract into a Nylon Housing (B). They can hang from anchorage by a Carabiner (C)
attached through the Swivel Eye (D) on the top of the SRD. A Self-Locking Snap Hook (E) on the end of the Lifeline attaches to
the designated Fall Arrest connection on a Full Body Harness. A Bumper (F), protects the Wire Rope and Ferrules securing the
Snap Hook from abrasion and corrosion.
Figure 1 defines the Smart Lock SRD models covered by this instruction manual. The following SRD Types are available:
• Self-Retracting Lanyard (Figure 2A): Self-Retracting Lanyards (SRLs) are suitable for applications where the SRL is
mounted overhead, the lifeline remains generally vertical during use, and no Free Fall is possible.
• Self-Retracting Lanyard with Leading Edge (Figure 2B): Self-Retracting Lanyards with Leading Edge (SRL-LEs) are
suitable for applications where the lifeline remains generally horizontally during use and possible Free Fall is limited to 5 ft
(1.5 m). SRL-LEs have an integral Energy Absorber (G), or similar component, to withstand impact loading of the lifeline
over a sharp or abrasive edge during fall arrest and minimize fall arrest forces on the user.

Component Specifications:

Housing Halves Material
9513609 + 9513622 Nylon - 20 ft (6 m) and 30 ft (9 m) SRLs, 20 ft (6 m) SRL-LEs
9513638 + 9513645 Nylon - 35 ft (10.7 m) and 50 ft (15 m) SRLs, 30 ft (9 m) SRL-LEs
Lifeline Description
9501479 + 9502194 3/16 in (4.76 mm) galvanized steel wire rope, self locking alloy steel swiveling snap hook with indicator.
9501613 + 2100044 3/16 in (4.76 mm) stainless steel wire rope, self locking stainless steel swiveling snap hook with indicator.
9501087 + 1246446 7/32 in (5.56 mm) galvanized steel wire rope, EZ-Stop energy absorber with self locking alloy steel swiveling snap hook
with indicator.
3500076 + 9502194 1/4 in (6.35 mm) Vectran rope, self locking alloy steel swiveling snap hook with indicator.
Hook Description
9502194 Swiveling Self-Locking Snap Hook with Impact Indicator
2100044 Swiveling Self-Locking Snap Hook with Impact Indicator
2000112 Carabiner
2000127 Carabiner
Lifeline Tensile Strength:
Performance Specifications:
SRL Specifications
Capacity Range
Maximun Arresting Force
Average Arresting Force
Maximum Arresting Distance
Minimum Fall Clearance
Maximum Free Fall Distance

SRL-LE Specifications

Capacity Range
Maximun Arresting Force
Average Arresting Force
Maximum Arresting Distance
Minimum Fall Clearance
Maximum Free Fall Distance
Minimum Setback Distance
1 Free Fall: Correct application of the SRL, with the user working directly below the anchorage point and no lifeline slack, will eliminate Free Fall. Free Fall should be
limited to 2 ft (0.6 m) where the user is not directly under the SRL or minimal slack exists in the lifeline.
®
Table 1 – Specifications
9501479 - 3/16 in dia. Galvanized Steel - Min. Tensile Strength 4,200 lbs (18.7 kN)
9501613 - 3/16 in dia. Stainless Steel - Min. Tensile Strength 3,600 lbs (16.0 kN)
9501087 - 7/32 in dia. Galvanized Steel - Min. Tensile Strength 5,600 lbs (24.9 kN)
3500076 - 1/4 in dia. Vectran Rope - Min. Tensile Strength 6,375 lbs (28.4 kN)
ANSI/OSHA
130 lbs - 310 lbs (59 kg - 141 kg)
1,350 lbs (6 kN)
900 lbs (4 kN)
30 in (0.8 m)
4 ft (1.2 m)
0 ft (0 m) 1
ANSI/OSHA
130 lbs - 310 lbs (59 kg - 141 kg)
1,350 lbs (6 kN)
900 lbs (4 kN)
42 in (1.07 m)
6 ft (2 m) when anchored overhead, 15 ft (4.457 m) when falling over an edge
5 ft (1.5 m)
1.5 ft (0.46 m)
Smart Lock Self-Retracting Devices (SRDs). Smart Lock SRDs are
Material
Zinc Plated Steel
Stainless Steel
Alloy Steel
Stainless Steel
CSA
130 lbs - 310 lbs (59 kg - 141 kg)
1,350 lbs (6 kN)
NA
47 in (1.2 m)
4 ft (1.2 m)
130 lbs - 310 lbs (59 kg - 141 kg)
See "Section 2.8 - CSA Z259.2.2-17 Deployment Calculation"
9
1
Gate Strength Throat Size
3,600 lbs (16 kN) .75 in (1.9 cm)
3,600 lbs (16 kN) .75 in (1.9 cm)
3,600 lbs (16 kN) .69 in (1.75 cm)
3,600 lbs (16 kN) .69 in (1.75 cm)
OSHA
311 lbs - 420 lbs (141 kg - 191 kg)
1,800 lbs (8 kN)
NA
42 in (1.1 m)
6 ft (2 m)
CSA
1,350 lbs (6 kN)
860 lbs (3.8 kN)
Hook
9502194
2100044
9502194
9502194