Before Use; Inserting/Charging The Battery; Inserting The Battery - FujiFilm instax SHARE SP-2 Mode D'emploi

Before Use

Before using the printer, install the instax SHARE application on your device.
• When you are using an Android OS device, search for "instax SHARE" in the Google Play, then install the application.
* System requirements of an Android OS device: Android Ver 4.0.3 or later and Google Play are installed.
• When you are using an iOS device, search for "instax SHARE" in the App Store, then install the application.
* System requirements of an iOS device: iOS Ver 7.1 or later is installed.
You may not be able to print from some devices even if you have installed the instax SHARE application and your device
meets the requirements listed here.
Access instax SHARE website for the latest information on system requirements.

Inserting/Charging the Battery

Inserting the Battery

~
Push up the battery cover lock to
open the battery cover.
instax_BO-B_6lang.indb 5
Ÿ
Insert the battery according to the arrow on it.
Make sure the yellow line on the battery aligns
with the mark on the printer.
!
Push the battery cover
lock until it clicks into
place.
5
4/13/2016 10:33:37 AM
EN