Specifications - FujiFilm instax SHARE SP-2 Mode D'emploi

SPECIFICATIONS

instax SP-2
Recording method
Film
Photo capacity
Image size
Supported image size
Printing resolution
Printing levels
Interface
Supported image format
Printing time
Approximate printing
capacity
Charging time
Power supply
Power consumption
Operating temperature
Dimensions/Weight
Supplied accessory
* Specifications above are subject to change for improvement.
instax_BO-B_6lang.indb 15
3-color exposure with OLED
Fujifilm INSTAX mini instant color film (sold separately)
10 prints/pack
62 mm×46 mm
800×600 dots
320 dpi
256 levels per color (RGB)
Standard compliance: IEEE802.11b/g/n
Operation frequency: 2.4 GHz (5 GHz is not supported.)
JPEG, PNG
Image recording - photo output (fed out): Approx. 10 sec.
Approx. 100 prints (Based on our test conditions)
* Varies depending on the conditions of use.
Approx. 90 minutes (Varies depending on battery remaining level)
NP-45S (1 piece)
2 W
+5°C to +40°C/+41°F to +104°F (no condensation)
89.5 mm × 131.8 mm × 40 mm (excluding projections)
250 g (without battery and film pack)
USB cable
(BOB711)
EN
15
4/13/2016 10:33:40 AM