Turning On/Off The Printer; Checking Remaining Battery Life - FujiFilm instax SHARE SP-2 Mode D'emploi

Loading the INSTAX mini Film Pack
(Contunued)
EN
!
Close the back cover. Make sure the
back cover lock clicks into place.
⁄
8
instax_BO-B_6lang.indb 8
The film cover (black) is ejected
automatically when the back
cover is closed. Remove the film
cover from the print exit.

Turning on/off the Printer

Press and hold the POWER button for approx. 1 second
to turn the printer on or off.
Turning the printer on lights up the battery remaining
LED and it turns off after a certain period of time.
If no operation occurs for a certain period of time, the
printer turns off automatically.

Checking Remaining Battery Life

Use the battery remaining LED to check when turning
the printer on or while printing is in progress.
Indication Remaining battery life
Green At more than half capacity
Low. Charging the battery is
Red
recommended. (See page 6.)
Printer turns off No battery capacity remains.
after flashing red. Charge the battery. (See page 6.)
4/13/2016 10:33:37 AM