Maintenance; Safety Notes; Service; Service Intervals - Burkert 0258 Instructions De Service

All manuals and user guides at all-guides.com

MAINTENANCE

Safety notes

ATTENTION!

Service

Check the following within the context of the service work:
• that the lines are firmly seated,
• the plastic body for cracks and other visible damage,
• the maintenance of the permitted temperatures (see the TECHNICAL
DATA chapter) ,
• the proper functioning of the device.

Service intervals

Check the correct condition of the motorised control valve with regard to
assembly, installation, and operation at regular intervals.
Take the following factors into consideration when determining the inspection
intervals:
• Operating conditions (loading level, incorrect operation) ,
• The manufacturer's data in the technical documentation (mechanical and
electrical service life),
• Major changes in the system.

Correction of faults

If you detect faults that have an effect on the functionality of the motorised
control valve, these must be corrected immediately:
• Place the device out of operation, and switch it free of voltage!
• Correct the fault.
• Put the device back into operation.
During maintenance and service work, ensure that:
• work on the devices may only be carried out by persons
who have been authorised and have received the
corresponding training.
• the devices must be switched free of electrical voltage
before the start of the maintenance work.
• the national regulations valid in the country of use are
complied with.
0258 - 19