Güde 02003 Traduction Du Mode D'emploi D'origine page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Mechanical residual risks
Threat
Description
Jamming
Parts of body can get jammed or amputated
when splitting as a result of hydraulic knife
going down.
There is a risk the split wood gets jammed.
Please be aware that wood is strongly tight
when being removed and fingers can get
jammed in the splitting crack.
Cutting
Parts of body can get jammed or amputated
when splitting as a result of hydraulic knife
going down.
Common
Violent splitting can cause serious injuries when
accidents
dry wood is processed.
Pieces of wood created during splitting can fall
down and injure especially legs of the working
person.
Splitting wedge extension can get in the table
and thus cause appliance damage or serious
injuries of persons.
Getting
Wide clothing, jewels and long hair can get
caught,
caught by moving parts.
winding up
Electrical residual risks
Threat
Description
Direct
Faulty cable or plug can be a cause of electric
electric
shock.
contact
Indirect
Injury by conductive parts of exposed electrical
electric
or faulty construction parts
contact
Noise threat
Threat
Description
Hearing
Long-term working with the appliance can
damage
damage hearing.
Neglect of ergonomic principles
Threat
Description
Negligent
Appliance operation without corresponding
use of
protective aids can cause serious external and
personal
internal injuries.
protective
aids
Inadequate
Insufficient lighting represents a high safety
local lighting
risk.
Protective measure(s)
Always use the two-hand safety
operation. Do not interfere in the
splitting process.
Two persons must never work with the
appliance
Get out any jammed piece of wood.
Beware of falling wood – it can injure
your legs.
Always use the two-hand safety
operation. Do not interfere in the
splitting process.
Never interfere in the splitting process.
Always keep a sufficient safety
distance.
Always operate the appliance carefully
and cautiously.
Always wear specified protective
clothing and work carefully.
Always wear protective glasses when
working with the appliance.
Always wear specified protective
clothing and work carefully.
Wear corresponding safety shoes to the
specified protective clothing.
Always disassemble the table before
working with the splitting wedge
extension (see page 12)
Always wear close-fitting clothing; do
not wear jewels and protect your hair
with a hairnet.
Protective measure(s)
Always have any faulty cables or plugs
replaced by a specialist. Use the
appliance with a safety switch against
stray current (FI).
Always disconnect the plug at
maintenance work.
To be operated only with a safety
switch against stray current (FI).
Protective measure(s)
Always wear earphones.
Protective measure(s)
Always wear specified protective
clothing and work carefully.
Always ensure sufficient lighting when
working with the appliance.
11
Residual risk
Worn-out or damaged aid
must immediately be
replaced.
Have an eye to bystanders!
Always wear safety shoes
when working.
Worn-out or damaged aid
must immediately be
replaced.
Worn-out or damaged aid
must immediately be
replaced.
Always have an eye to
bystanders.
Residual risk
Check the feeder cable
before each use
Residual risk
Residual risk

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dhh 1050 / 10 tp

Table des Matières