Table des Matières
Publicité
Certificate No.:
IECEx FMG 16.0012X
Date of issue:
2020-04-02
Manufacturer:
Bühler Technologies GmbH
Harkortstaβe 29
40880 Ratingen
Germany
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with
the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was
assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in
IECEx Scheme Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2011
Explosive atmospheres - Part 0: General requirements
Edition:6.0
IEC 60079-15:2010
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
Edition:4
This Certificate does not indicate compliance with safety and performance requirements
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Reports:
US/FMG/ExTR16.0013/00
Quality Assessment Report:
DE/BVS/QAR16.0002/03
other than those expressly included in the Standards listed above.
US/FMG/ExTR16.0013/01
IECEx Certificate
of Conformity
Page 2 of 4
Issue No: 2
US/FMG/ExTR16.0013/02
Publicité
Table des Matières
