Cleaning & Maintenance; Notes On Disposal; Troubleshooting - Sportplus SP-MR-010 Mode D'emploi

7. CLEANING & MAINTENANCE
• Make sure that all bolts/nuts are correctly tightened after assembly and before use.
• Clean the unit regularly with a slightly damp cloth and a mild cleaning agent. Do not
use any solvents to clean the unit.
• This applies to the padding and handles especially since these parts are in constant
contact with your body during training. You can cover the pads with a towel during
training to protect them.
• Check all rollers for ease of movement before use. Rollers that move with difficulty
result in excessive wear and/or damage to the cables. If one or more rollers is tight,
make sure they are installed correctly. Never grease the contact area between the
roller and the cable! If in doubt, please do not hesitate to contact our customer service.
• Maintain the weight guide tube regularly using a little silicone oil.
• You should grease the axles of all moving parts once every one or two years. You
can use an off-the-shelf grease to do so.

8. NOTES ON DISPOSAL

Environmental protection:
Packaging materials are raw materials and can be recycled.
Separate the packaging materials and dispose of them properly in
the interest of the environment. Your local administration can provide
additional information.
Used devices do not belong in household waste!
Dispose of used devices properly! Doing so helps fulfill our responsibility to
protect the environment. Your local administration can provide information on
collection points and opening hours.
Batteries do not belong in household waste!
As the end user, you are legally required to return discharged batteries to a
collection point. You can take your old batteries to the public collection points in
your community or you can take them to any place where batteries of that type
are being sold.

9. TROUBLESHOOTING

PROBLEM CAUSE
Computer
No display or no No power supply
function
No cable connection
Mechanics
Missing parts –
Rowing machine is Parts subject to friction
squeaking are not greased
sufficiently
WHAT TO DO?
No batteries — insert batteries
Depleted batteries — insert new batteries
Batteries inserted incorrectly — insert correctly
Check cable connection
If this does not solve the problem, contact our
service center.
Check packaging
Call our service center
Grease squeaking part with high-viscosity oil or
grease
42