Functions - Ambu AmbuMan Instrument Mode D'emploi

3.3. Part/Material
Basic unit Polyethylene
Instrument part ABS plastic
Skull PVC, hard
Chest skin PVC, soft
Face piece PVC, soft
Head bag, disposable Polyethylene
Training suit 50% cotton and 50% polyester
Carrying bag/training mat PVC coated nylon material
3.4. Battery pack (optinal only AmbuMan Wireless)
The AmbuMan Wireless can be equipped with an battery pack.
3.5. Battery lifetime (only AmbuMan Wireless)
The battery lifetime using WLAN is approximately 10 hours using fully charged
battery pack.
3.6. Adapter (only AmbuMan Wireless)
AC/DC Adapter
Input: 100-240 V AC / 47-63 Hz / 700 mA)
Output: 12 V DC / 2,0 A
3.7. Operating distance (only AmbuMan Wireless)
The wireless connection has a range of approximately 50 meters outside having no
obstacles in between.
3.8. Usage and storage:
Storage temperature (non-condensing): –18 °C (-0,4 °F) to 40 °C (105 °F)
Usage temperature (non-condensing): –5 °C (23 °F) to 40 °C (105 °F)
Humidity: 5% to 95%

4. Functions

4.1. Hygienic System ①
Schematic diagram:
The head bag has been mounted in the skull and the face piece fitted.
Ventilation has just started, see (1.1).
A: Trainee's air B: Ambient air
Ventilation is concluded and expiration has just started, see (1.2).
NOTE: If a leakage occurs around the mask or if insufflation proves difficult, it is
normally due to incorrect positioning when lifting the chin or to insufficient
hyperextension of the head.
5
To comply with the requirements of the hygienic system, and to achieve a proper seal
and accurate measuring results, a head bag must always be used.
All trainees must use their own face piece and head bag only during training.
4.2. Monitoring instrument ②
To pull out the monitoring instrument depress the catch (2.1) and let the instrument
slide out.
The training can also be performed with the monitoring instrument inside the manikin.
Readings on the monitoring instrument can be viewed from two sides. By activating the
cover plate on the side facing the trainee, instrument readings can be concealed from
trainees undergoing a CPR test (2.2), while allowing the training instructor to monitor the
effectiveness of the CPR on the opposite side.
The monitoring instrument is divided into two halves. The left-hand side registers
ventilation, including inspiration volume (2.3), and provides indication of stomach inflation
(2.4). The right-hand side of the instrument registers chest compression, including depth of
compression in millimetres (2.5), and provides indication of incorrect hand positioning (2.6).
The gauges for insufflated volume and depth of compression are designed to display
green when the correct volume and chest compression have been reached, and red when
the measurement recorded is outside the correct range.
If the display is green and red the measurement is at the borderline of the correct range.
The instrument registers inflation in the stomach (2.4) and incorrect hand positioning (2.6)
by changing from black to red colour display.
The values on the scale plates on the monitoring instrument are in accordance with the
actual guidelines for resuscitation. It is possible to order instrument plates with other
recommendations or guidelines.
4.2.1. LAN connector (only AmbuMan Wireless) ②
To connect the manikin to a computer the LAN connector (2.7), can be used, placed on the
backside of the manikin.
4.2.2. Power button (only AmbuMan Wireless) ②
To turn on the manikin for the use of the software application press the power button (2.8)
on top of the monitoring instrument. The green LED (2.09) is flashing while the system is
booting and is steady activated once the system is completely powered up.
To turn off the manikin the power button needs to be pressed at least 3 seconds.
If the power button is pressed for 10 seconds and more the system is forced to shut down.
6