Before The First Use - Steba FG 70 Mode D'emploi

∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ The manufacturer is not liable for damage occurred by using
the apliance in another way than described or if a mistake in
operating has been made.
∙ The apliance becomes very hot. Do not move the apliance until
it has cooled down!
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
∙ Attention! Housing and glass get hot. Danger of
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture)
least 70cm to burnable materials. Only use it on a even, stable
and a heat resisting surface.
Cleaning and maintainance:
∙ The device should be cleaned after each use
∙ Unplug the device
∙ The device should cool down a little. It can be cleaned easier
when it is not that hot.
∙ Never immerse the device in water!
∙ Use a humid cloth with a little bit of detergent to clean it. Re-
sisting dirt should be covered with some oil, wait for ca 5 min
and try to remove it again with a humid cloth. Do not use abhe-
rasive cleaners. When cleaning the oil tray, be careful, that the
liquid in it is cooled down completely.
∙

Before the first use:

Oil the grill slightly before the first use. Then heat up the device for ca 10 min with closed
plates without food and the thermostat on maximum level. Afterwards clean the plates with
a humid cloth. Do not use agressive cleaners to avoid damages to the non-stick surface.
12
and keep a distance of at