Before Initial Use - Steba FG 100 Mode D'emploi

Before initial use:

Grease the grilling surface lightly before using for the first time. Then heat up the grill for ten
minutes at the maximum setting with the grill closed and empty. Then wipe the plates with
a damp cloth.
1) +/- button for temperature / time
2) Button temperature / time
3) Grill function without timer
4) On/off button
5) Control light
Operation
∙ Plug in the device, the display shines blue and beeps once. If no setting is made within 1
minute the device turns off again.
∙ Press the on/off button
shines in orange. The temperature of 205°C and the time --:-- are shown.
∙ Press the
button, the temperature can be set.
∙ Use the +/- button to set the desired temperature in steps of 10°C from 75°C up to 235°C.
∙ Press the
button again, the time 01:00 is blinking.
∙ Use the +/- button to set the desired time, e.g. 10 minutes. The time can be set from 1 to
30 minutes in steps of 1 minute.
∙ As long as the device heats up (about 5 minutes), the set time das not change.
∙ If the device heats up the symbol
for 2 seconds. The red control light shines and the display
rotates.
15