Steba FG 70 Mode D'emploi page 13

product graphics FG 70 | position control
Usage options
Contact grilling:
Plates rest directly on top of food.
Excess fat runs into the collection tray.
Adjusted at adjusting hinge to
product graphics FG 70 | eject
roduct graphics FG 70 | position control
Inserting the plates
The plates are easiest to change in the
1. Bottom plate:
Slide bottom grill plate into retention catches at a slight angle, then lower plate and enga-
ge by pushing the button on the left-hand side
2. Top plate:
Slide top ribbed plate into retention hooks at a slight angle and engage by pressing the
button on the right-hand side
grill. The smooth plate is used for fish, vegetables or egg dishes.
Always ensure that the fat collection tray is inserted into the bottom part.
3. Raise the slider
Toasties – au gratin:
The top plate is above the food
product graphics FG 70 | eject
Adjust at adjusting hinge. Lift top part using handle and
adjust height
top eject button
top eject button
. The plates can be slid into the top or bottom part of the
for transport or vertical storage.
product graphics FG 70 | position con
.
Party grilling:
Both grill plates are horizontal with double
grilling area. Adjust at adjusting hinge to
and swivel the grill open.
position.
.
printdata attached
as *.ai and *.pdf
color: black as in
product sample
To make it easier for the oil to
drain from the open griddle, clip the
provided plastic part to the handle so
that it tilts at a slight angle.
© GESTALTUNGSWESEN any unau
bottom eject b
bottom eject button
printdata attached
as *.ai and *.pdf
color: black as in
product sample
© GESTALTUNGSWESEN any un
product graphics FG 70 | 09.02.2012
© GESTALTUNGSWESEN any unauthorised use is prohibited
product graphics FG 70 | 09.02
© GESTALTUNGSWESEN any unauthorised use is pro
product graphics
product graphic
printdata attac
as *.ai and *.p
color: black as
product samp
13