Dvd To Videotape Duplication 39 - Philips DVP620VR/07 Mode D'emploi

H9621CD(EN)_1.qx4 04.4.7
Follow the steps below to copy a DVD to a videotape. This will
be possible only if the DVD is not copy protected.
Before you begin:
●
Put a videotape in the cassette compartment. Make sure the
tape's record tab is intact and the tape is long enough to record
the DVD.
●
Put the DVD you want to copy in the disc tray.
●
Press VCR so the VCR light appears on the front of the
DVD/VCR.
●
Turn on the TV and set it to channel 3, 4, or its Video
Input.
1
Point the remote control at the DVD/VCR. Press
Number buttons 0, 0, 3. "DISC" will appear on the TV
screen.
2
Press SPEED until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape
speed are on page 72.
3
Press RECORD
on the display panel.
4
Press DVD. Press PLAY B to play the disc.
5
To pause the recording, press VCR, then press PAUSE
k once. REC will flash. To resume recording, press
RECORD
I
6
To stop recording, press VCR, then press STOP C.
0:00 PM Page 39
DISC
to start recording. 'REC' will appear
I
or press PAUSE k again. REC will reappear.

DVD to Videotape Duplication 39

5,6
6
2
1
• A timer recording is not possible
• You cannot copy a DVD to a
STANDBY-ON
SEARCH MODE DISPLAY
REPEAT REPEAT AUDIO
A-B
SUBTITLE ZOOM ANGLE SKIP / CH
RETURN TITLE CLEAR/RESET SLOW
4
VCR VCR/TV DVD
DISC/VCR SYSTEM
MENU MENU
OK
STOP PLAY PAUSE
TIMER SET MARKER RECORD
SPEED
1 2 3
4 5 6 7
8 9 0 +10
3,5
Helpful Hints
during DVD to videotape
duplication.
videotape if you are using
Progressive Scan. Details are on
page 12.
5