Philips DVP620VR/07 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

H9621CD(EN)_1.qx4
04.4.7
10 Hookups (cont'd)
This connection will let you use the features of both the VCR and the DVD Player.
DVD/VCR
Connections
1
Connect a Cable TV or Satellite signal to the
DVD/VCR's ANT -IN (Antenna In) jack.
2
Use an RF coaxial cable (as the one supplied) to con-
nect the ANT -OUT (Antenna Out) jack on the
DVD/VCR to the IN jack on the Cable Box/Satellite
Receiver.
3
Use a second RF coaxial cable to connect the OUT
jack on the Cable Box/Satellite Receiver to the
ANTENNA IN jack on the TV.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to
the DVD/VCR.With the connection on this page:
You may watch one channel while recording another. Follow these
steps:
1) Put the Cable Box/Satellite Receiver on the same channel as
the DVD/VCR's output channel (03 or 04).The DVD/VCR's output
channel is channel 3 when the DVD/VCR is new.To alternate it
between 3 and 4, press and hold the (VCR) PLAY B button on the
front of the DVD/VCR for 3-5 seconds during tape playback. For
details, see step 4 on page eight. Set the TV to the Cable
Box/Satellite Receiver output channel (03 or 04).
2) Press VCR to put the DVD/VCR in VCR mode.The VCR light
will appear on the front of the DVD/VCR.
3) Press VCR/TV on the remote to choose VCR position.
4) Press SKIP ∑/CH o or SKIP w/CH p to select the channel
you want to record at the DVD/VCR. Press RECORD
the recording.
5) Press VCR/TV on the remote once to put the DVD/VCR in TV
position.
6) Select the channel you want to watch at the Cable
Box/Satellite Receiver.
When you play a tape or Disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR's output channel (03 or 04).
Set the TV to the Cable Box/Satellite Receiver output channel (03
or 04).
0:00 PM
Page 10
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
2
1
Cable
Signal
ANT - IN
ANT-OUT
RF coaxial cable
Cable Box/Satellite Receiver
IN
OU T
RF coaxial cable
to start
I
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dvp620vr/17

Table des Matières