H9621CD(EN)_1.qx4
04.4.7
This connection will let you use the features of both the VCR and the DVD Player.
1
Connect the antenna or Cable TV signal to the ANT -IN (Antenna In)
jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV. Match the cable colors to the jack
colors. If the TV has a single AUDIO IN jack, use the white audio cable to
connect the DVD/VCR's white DVD/VCR AUDIO OUT (left) jack to the TV's
AUDIO IN jack.You will not use the red cable. Or, purchase a "splitter" audio
cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV's
single AUDIO IN jack.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS,
Composite, or Baseband video.
4
Connect the power cords of the TV and the DVD/VCR to a power
outlet.Turn on the TV and set it to the correct Audio/Video In chan-
nel. Go to your lowest TV channel (01 or 02), then change channels down-
ward until you see VCR or DVD playback on the TV screen.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD
Video logo will appear on the TV screen when you get the TV on the correct
Audio/Video In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR's
display panel. Disable
ing and holding PLAY B (DVD) on the front of the DVD/VCR for more than
five seconds. Details are on pages seven and 64-65.
5
You are ready to turn on the DVD/VCR. Go to page 17 to complete
the first-time setup.
0:00 PM
Page 11
DVD/VCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
DVD
DVD/VCR
VCR
DIGITAL
AUDIO
S-VIDEO
COMPONENT
AUDIO OUT
AUDIO IN
VIDEO OUT
AUDIO OUT
OUT
OUT
Y
L
L
L
C
/
B
R
R
P
B
COAXIAL
VIDEO OUT
VIDEO IN
R
C
/
R
P
R
Progressive Scan either in the DISPLAY menu or by press-
Hookups (cont'd) 11
Antenna or Cable TV
1
Signal to ANT-IN Jack
ANT - IN
ANT-OUT
2
Audio Cables
3
Video Cable
AUDIO IN
Audio and
L
Video IN Jacks
on TV
R
VIDEO IN