Video Cassette Playback - Philips DVP620VR/07 Mode D'emploi

H9621CD(EN)_1.qx4 04.4.7

18 Video Cassette Playback

Read and follow the steps below to play a tape.
1
Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 7-15.
2
With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The VCR
light will appear on the front of the DVD/VCR. If the tape's
record tab has been removed, play will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary.The VCR light will
appear on the front of the DVD/VCR.
3
If playback does not start automatically, press VCR,
then press PLAY B.
4
Press STOP C to stop playback.
5
Press h to rewind the tape.
6
After the tape stops, press STOP/EJECT CA on the
front of the DVD/VCR to remove the tape.
0:00 PM Page 18
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
STANDBY-ON
SEARCH MODE DISPLAY
REPEAT REPEAT AUDIO
A-B
SUBTITLE ZOOM ANGLE SKIP / CH
RETURN TITLE CLEAR/RESET SLOW
3
VCR VCR/TV DVD
DISC/VCR SYSTEM
MENU MENU
5
OK
4
STOP PLAY PAUSE
TIMER SET MARKER RECORD
SPEED
1 2 3
4 5 6 7
8 9 0 +10
6
Press STOP/EJECT C
on the DVD/VCR.
Helpful Hints
• Other tape playback features are
on pages 40-47.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 40.
• You must connect the DVD/VCR to
a TV using the RF coaxial cable or
the audio/video cables in order to
use the VCR features.These hookups
are explained on pages eight and
11.
A