Timer Recording - Philips DVP620VR/07 Mode D'emploi

H9621CD(EN)_1.qx4 04.4.7

36 Timer Recording

Follow the steps below to program the VCR of the DVD/VCR to
record TV programs while you're away from home. Before you
begin:
●
Set up the TV channels at the DVD/VCR. Details are on page 26.
●
Set the clock. Details are on pages 28-29.
●
Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape's record tab is intact and the tape is long enough
to record the program(s).
●
Press VCR so the VCR light appears on the front of the
DVD/VCR.
1
Press DISC/VCR/MENU so MENU appears.
2
Press o or p to select TIMER PROGRAMMING.Then,
press B. Program numbers that do not have a timer recording
stored will flash.
TIMER PROGRAMMING
PROG.
DATE
START TIME
END TIME
CHANNEL
REC SPEED
3
Press o or p to select an empty program.Then,
press B.
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
4
Press o or p to select ONCE, DAILY, or WEEKLY.
Then, press B.
●
ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
●
DAILY - The VCR will record a TV program at the same time
on the same channel every day, Monday through Friday.
●
WEEKLY - The VCR will record a TV program at the same
time on the same channel every week, for example, every
Monday.
PROGRAM NUMBER
B ONCE
DAILY
WEEKLY
0:00 PM Page 36
12345678
1
– – / – –
– – : – – – –
– – : – – – –
– –
– –
1
STANDBY-ON
SEARCH MODE DISPLAY
REPEAT REPEAT AUDIO
A-B
SUBTITLE ZOOM ANGLE SKIP / CH
RETURN TITLE CLEAR/RESET SLOW
1
VCR VCR/TV DVD
DISC/VCR SYSTEM
MENU MENU
OK
STOP PLAY PAUSE
TIMER SET MARKER RECORD
SPEED
1 2 3
4 5 6 7
8 9 0 +10
Helpful Hints
• You cannot access the TIMER PRO-
GRAMMING menu at step 2 if
the clock is not set.The CLOCK
SET menu will appear. Follow the
steps on pages 28-29 to set the
clock.
• Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday
DATE at step 5, the correct program
will not be recorded.The VCR will
alter the recording date and record
a different program than the one
you intended.
2-4