Philips DVP620VR/07 Mode D'emploi page 37

H9621CD(EN)_1.qx4 04.4.7
5
To enter the recording date, press o or p until the
month appears.Then, press B.
Next, press o or p until the day appears.Then,
press B. The day of the week will appear. You cannot
record more than one year in advance.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME – – : – – – –
CHANNEL
REC SPEED
6
To enter the recording's start time, press o or p until
the hour appears. Press B.
Press o or p until the minute appears. Press B.
Finally, press o or p to point to AM or PM. AM or
PM will flash beside the start time. Press B.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME – – : – – – –
CHANNEL
REC SPEED
7
Repeat the procedure in step 6 to set the record-
ing's end time.
8
Press o or p until the channel number appears.
Then, press B.
●
If you are using a standard antenna/Cable TV hookup (as
shown on page eight), select the channel of the TV pro-
gram you want to record.
●
If you are recording from other equipment, select L1 or
L2.To determine L1 or L2, refer to the Helpful Hints on
page 38.
●
If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Details are on page nine.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME 0 8 : 3 0 P M
CHANNEL
REC SPEED
Instructions continue on page 38.
0:00 PM Page 37
1
0 5 / 0 4 TUE
– – : – – – –
– –
– –
1
0 5 / 0 4 TUE
0 7 : 3 0 P M
– –
– –
AM
BP M
1
0 5 / 0 4 TUE
0 7 : 3 0 P M
16
– –
Timer Recording (cont'd) 37
SEARCH MODE
REPEAT REPEAT
A-B
SUBTITLE ZOOM
RETURN TITLE CLEAR/RESET SLOW
VCR VCR/TV
DISC/VCR
MENU
OK
STOP PLAY
TIMER SET MARKER
SPEED
1
4 5
8 9
Helpful Hints
• If you are recording from other
equipment, set CHANNEL to L1 or
L2 at step 8. If you connected the
other equipment to the AUDIO and
VIDEO In jacks on the front of the
DVD/VCR, choose L2. If you con-
nected the equipment to the AUDIO
IN and VIDEO IN jacks on the back
of the DVD/VCR, choose L1.
• Enter the information while the
space is flashing.
• To stop a started timer recording,
press STOP/EJECT C A (VCR) on
the front of the DVD/VCR. (You
cannot stop a started timer record-
ing with the STOP C button on the
remote.)
More Helpful Hints are on
page 76.
STANDBY-ON
DISPLAY
AUDIO
ANGLE SKIP / CH
DVD
SYSTEM
MENU
5-8
PAUSE
RECORD
2 3
6 7
0 +10