Timer Recording - Philips DVD750VR Mode D'emploi

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 36

36 Timer Recording

Follow the steps below to program the VCR of the DVD/VCR to
record TV programs while you're away from home. Before you
begin:
Set up the TV channels at the DVD/VCR. Details are on page 26.
Set the clock. Details are on pages 28-29.
Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape's record tab is intact and the tape is long enough
to record the program(s).
Press VCR so the green VCR light appears on the front of the
DVD/VCR.
1
Press DISC/VCR/MENU so MENU 1 appears.
2
Press o or p to select TIMER PROGRAMMING.Then,
press B. Program numbers that do not have a timer recording
stored will flash.
TIMER PROGRAMMING
PROG.
DATE
START TIME
END TIME
CHANNEL
REC SPEED
3
Press o or p to select an empty program.Then,
press B.
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
4
Press o or p to select ONCE, DAILY, or WEEKLY.
Then, press B.
ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY - The VCR will record a TV program at the same time
on the same channel every day, Monday through Friday.
WEEKLY - The VCR will record a TV program at the same
time on the same channel every week, for example, every
Monday.
PROGRAM NUMBER
B ONCE
DAILY
WEEKLY
12345678
1
– – / – –
– – : – – – –
– – : – – – –
– –
– –
1
STANDBY-ON
SEARCH MODE DISPLAY
REPEAT REPEAT AUDIO
A-B
SUBTITLE ZOOM ANGLE SKIP / CH
RETURN TITLE CLEAR/RESET SLOW
VCR/TV
1
DVD VCR
SYSTEM DISC/VCR
MENU MENU
OK
2-4
STOP PLAY PAUSE
TIMER SET VCR Plus+ RECORD
SPEED
1 2 3
4 5 6 7
8 9 0 +10
Helpful Hints
• You cannot access the TIMER PRO-
GRAMMING menu at step 2 if
the clock is not set.The CLOCK
SET menu will appear. Follow the
steps on pages 28-29 to set the
clock.
• Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday
DATE at step 5, the correct program
will not be recorded.The VCR will
alter the recording date and record
a different program than the one
you intended.