Starting Emp Ns Connection At The Computer - Epson EasyMP EMP-745 Guide De Mise En Route

Starting EMP NS Connection at the Computer

The following explanations refer to the Windows operating system unless otherwise
mentioned. The same basic windows are displayed when using Macintosh
computers.
Procedure
1
Check that the preparation for connecting to the LAN has been carried
out at the computer.
If using Windows in easy connect mode
Check that the computer's wireless LAN settings are appropriate for ad hoc
mode.
"Computer Wireless LAN Settings" p.26
If using a Macintosh in easy connect mode (ad hoc mode)
Click the icon that shows the communication status in the top-right corner of
the computer screen, and select the projector's ESSID from the '"Computer to
Computer Networks" drop-down list box.
If using a Macintosh in access point mode
Click the icon that shows the communication status in the top-right corner of
the computer screen, and check that it appears as follows.
Select the projector's ESSID.
AirPort: On
Connection to a wireless LAN
is possible.
43