Projector Network Settings - Epson EasyMP EMP-745 Guide De Mise En Route

Connecting Using Easy Connect Mode (Wireless LAN)

Projector Network Settings

First, connect the projector to the network in easy connect mode.
Use the remote control that is included with the projector to carry out these
connection settings.
Tip :
These settings only need to be made once, and will be kept from then on.
Procedure
1
Insert the wireless LAN card into the card slot on this projector.
p.19
2
Press the [Power] button to turn on the projector.
3
Press the [EasyMP] button.
EasyMP standby screen will be displayed.
4
Ensure that the "Config" button at the lower right on the window is
selected, and press the [Enter] button.
5
Tilt the [
and then press the [Enter] button.
22
] button down to move the cursor to "Wireless LAN" - "Basic",