Wireless Lan Security - Epson EasyMP EMP-745 Guide De Mise En Route

Connecting in Access Point Mode or Wired LAN Mode
8
Press the [
upper right of the screen, and press the [Enter] button.
The display returns to the EasyMP standby screen. If "Projector keyword" is
"ON", the projector keyword is also displayed.
Tip :
When connecting to a computer, check the projector keyword displayed in the EasyMP
standby screen and enter that keyword. Connection is not possible using a previous
keyword.

Wireless LAN Security

If you are using a wireless LAN, it is recommended that you carry out the
"Security" settings.
The radio signals that are used by wireless LANs can pass through barriers such as
walls, so that if security countermeasures are not implemented in some way,
problems such as interception of the contents of transmissions may occur. Hence
you should make the "Security" settings at times such as the following:
Select "Wireless LAN" - "Security" to make the security settings.
"Projecting Computer Images via a Network (Network Screen)" and "Security
Countermeasures for Wireless LAN" in the EasyMP Operation Guide
38
] button to move the cursor to "OK" button displayed in the
The value is displayed here.