Epson EasyMP EMP-745 Guide De Mise En Route page 37

Connecting in Access Point Mode or Wired LAN Mode
7
Move the cursor to the item that you would like to set, and then press
the [Enter] button to set the item.
Establish settings enabling the projector to function on the network.
Some menu items require characters or numerals to be entered. See "Entering
Characters and Numerals" (
numerals.
Projector
name
ESSID
Wireless LAN
only
Password for
WEB control
36
p.25 ) for details on entering characters and
Enter a name for the projector. This name is used to
identify the projector when connected to the network.
The default value is EMPxxxxxx (xxxxxx is the last 6
characters in the MAC address for the wired LAN).
Up to 16 single-byte alphanumeric characters can be
entered.
Enter the ESSID. If an ESSID has already been set by the
wireless LAN system, enter that value. The initial value is
"EPSON."
Up to 16 single-byte alphanumeric characters can be
entered.
If you set a password, entry of that password will be
required when using EasyWeb, and when starting EMP
Monitor.
Up to 8 single-byte alphanumeric characters are available.